Pagina 1 van 4

72 5speed model

Geplaatst: 19 aug 2012, 22:54
door austriamach3
Hello from austria
I'm planning to buy this bike with a stuck motor!
Most of cylinders and cranks are for '74 on wards models
Can i use them? Do i have the aditional ports on the backside of the cylinder?
Thanks
Chris

Re: 72 5speed model

Geplaatst: 20 aug 2012, 09:18
door Laars
austriamach3 schreef:Hello from austria
I'm planning to buy this bike with a stuck motor!
Most of cylinders and cranks are for '74 on wards models
Can i use them? Do i have the aditional ports on the backside of the cylinder?
Thanks
Chris


Hello there,
What bike??
Pics please :wink:

Geplaatst: 20 aug 2012, 11:04
door austriamach3
Its the same as 72 street from yamsam.
5speed footests and 40 km/h from austria.
Thanks
chris

Geplaatst: 20 aug 2012, 11:07
door Laars
Sorry,
I do not understand your question, can you be more specific

Geplaatst: 20 aug 2012, 11:38
door eriks
austriamach3 schreef:Its the same as 72 street from yamsam.
5speed footests and 40 km/h from austria.
Thanks
chris


5 speed and 40KM/H think you make a mistake they are faster a lot faster !!

You need the FS1 Cylinder on it wich carberateur you have a 16 mm ? and high exhaust maybe ??

Geplaatst: 20 aug 2012, 11:57
door austriamach3
No mistake!
Yamasam has the same. In austria the 5speeder was selled as motorfahrrad with 40km/h don't know the carbsize because i have not buyed it yet.
Does anyone know about matching crank and cylinders?

Geplaatst: 20 aug 2012, 12:10
door eriks
austriamach3 schreef:No mistake!
Yamasam has the same. In austria the 5speeder was selled as motorfahrrad with 40km/h don't know the carbsize because i have not buyed it yet.
Does anyone know about matching crank and cylinders?


wat do you mean with matching crank and cylinder ??

Strange that it only go 40km/h the bike have a high exhaust or low ?

Geplaatst: 20 aug 2012, 13:06
door Jens36
All different cylinders and crankshafts that where used on the FS1 from 1969 till 1986 are interchangeable.
The 378 cylinder is the only one that has a port less (flushing channel?). So you don't want that cylinder!
Other cylinders are: FS1, F5B, 3F2, 2RU ...
But i don't know which models where sold in Austria :)

Geplaatst: 20 aug 2012, 13:32
door eriks
Jens36 schreef:All different cylinders and crankshafts that where used on the FS1 from 1969 till 1986 are interchangeable.
The 378 cylinder is the only one that has a port less (flushing channel?). So you don't want that cylinder!
Other cylinders are: FS1, F5B, 3F2, 2RU ...
But i don't know which models where sold in Austria :)


Denk dat hij bedoeld dat de FS! is aangemeld als brommer en hebben ze er een langzaam cylindertje opgezet thats all

Tis gewoon een street 5 bak zoals we gewend zijn

You mean the FS1 is angemeld as a moped and maby the put a slower cylinder on it thats all

you need the FS1 cylinder on that street

Geplaatst: 20 aug 2012, 21:03
door austriamach3
Thank you all.
Sorry, i have only a mobile phone and so it's hard to answer.
The bbike was on the shelf for around 20 years and i only know that similar bikes in austria ran nearly 85.
I think i will need a new crank and so it would be interested where i can get one?
Also i'll needa new cylinder. What do you recommend are the aluminium athena better for durability?
The bike has the high exhaust. I think it's not best for performance but want to keep it.

Geplaatst: 20 aug 2012, 21:47
door HotWheels
As NIX would say, these kind of questions are random asked, so please take the effort to check the FAQ's :oops:

Geplaatst: 20 aug 2012, 21:49
door marco
I think he can't read dutch :wink:

Geplaatst: 20 aug 2012, 21:59
door HotWheels
Dan zou ie beter eerst investeren in een vertalend woordenboek :wink:

Geplaatst: 21 aug 2012, 01:29
door mpro09
austriamach3 schreef:Thank you all.
Sorry, i have only a mobile phone and so it's hard to answer.
The bbike was on the shelf for around 20 years and i only know that similar bikes in austria ran nearly 85.
I think i will need a new crank and so it would be interested where i can get one?
Also i'll needa new cylinder. What do you recommend are the aluminium athena better for durability?
The bike has the high exhaust. I think it's not best for performance but want to keep it.


hi and welcome, I like to order my parts from jmpb.nl or w-parts.nl
the athena cylinder is pretty much the best you can buy of the shelf, the crankshaft with the red red inlay is the "fastest" there is.
if you find a '72 5speed for the right price you shouldn't hesitate to buy it :wink: , especially if nobody touched it for 20 years.

good luck with your purchase, if you have anymore questions just ask them and we would love to see some pictures :wink:

Geplaatst: 21 aug 2012, 09:11
door eriks
Ik denk dat het over dit streetje gaat

Heb hem ook staan in mijn ebay :D :D :D

http://www.ebay.at/itm/Yamaha-50-SS-FS1 ... 3f1b1e705a