Hellow from Germany

Questions and answers about the Yamaha FS1
Plaats reactie
hcl2
Aan het inrijden
Aan het inrijden
Berichten: 5
Lid geworden op: 26 mei 2011, 11:53
Locatie: Aachen
Contacteer:

Bericht door hcl2 »

Hi,

I think the main problem with Tanjas brake is that the caliper itself is not able to move anymore. Brake lines and main-cylinder seem to be ok. The Brake pads need to be renewed; they are oily since Marco (the german one) fixed a squeaking noise with break assembly paste :). I am not shure if the break piston ist moving perfectly, but befor the brake power was ok for a non-moving caliper.

So I need help in understanding "Oud type ophanging" in this FAQ

http://www.fs1forum.com/viewtopic.php?t=5293

The translation in google translator is very bad (at least for me).

I wonder how it is possible to remove the rubber/plastic parts and to get out the bolts...

Greetings, Jan
Gebruikersavatar
NIX
10000km gereden
10000km gereden
Berichten: 10771
Lid geworden op: 25 nov 2009, 15:46
Locatie: Milsbeek

Bericht door NIX »

The caliper is suspended with 2 pins, behind 2 small rubbr plugs. They are threaded with M5 and should be pulled out. They can be really stuck, sometimes you need to hqeat the whole caliper and use a lot of force or make some kind of pulling lever. A crowbar or hammer with a block of wood can do the trick.

If you decide to also squeeze out the piston, pull the O-rings out, and clean the grooves in the caliper. There's a lot of corrosion that should be scraped out. Also clean the pits of corrosion in the O-ring. Don't worry if the O-ring is shaped a bit oddly, I put back O-rings that really looked funny, but didn't leak. As long as the thick one isn't broken or torn, it will work. Don't use normal grease in the caliber, the rubber cannot have it and will swell. For any kind of lubrication necessary, use some brake fluid. Use dot 3 or 4 (they can even be mixed, avoid dot 5.

Put in new pads and put some copper grease on the back of the pads and everywhere were they make contact with the caliper, just avoid grease on the liner and disc themself.

Bleed the brake not only at the caloper, also make sure there's no air at the connection from line and reservoir. I always lossen them a bit, put a rag to protect tank and painted parts and squeeze out the air there. After this, if the line is still ok, the brake will do it's work like never before.
Kijk eerst even in de FAQ.
hcl2
Aan het inrijden
Aan het inrijden
Berichten: 5
Lid geworden op: 26 mei 2011, 11:53
Locatie: Aachen
Contacteer:

Bericht door hcl2 »

Thank you very much for your advice.

Hopefully I will find time this week to follow your instructions. Till now I thought I had to remove some more parts of the caliper.
Gebruikersavatar
NIX
10000km gereden
10000km gereden
Berichten: 10771
Lid geworden op: 25 nov 2009, 15:46
Locatie: Milsbeek

Bericht door NIX »

Except for the brakeline, I just described how to remove pretty much everything.
Kijk eerst even in de FAQ.
Gebruikersavatar
TanjaFS1
1500km gereden
1500km gereden
Berichten: 1503
Lid geworden op: 25 okt 2010, 15:24
Locatie: Aachen - Aken - Aix la Chapelle

Bericht door TanjaFS1 »

great fighter.



and thx.
Gebruikersavatar
TanjaFS1
1500km gereden
1500km gereden
Berichten: 1503
Lid geworden op: 25 okt 2010, 15:24
Locatie: Aachen - Aken - Aix la Chapelle

Bericht door TanjaFS1 »

First accident survived. Take care the streets are slippery.
Gebruikersavatar
marco
Sheriff of the Posbank
Sheriff of the Posbank
Berichten: 23398
Lid geworden op: 25 feb 2007, 16:56
Locatie: in the-middle-of-nowhere-noord-holland : Edam

Bericht door marco »

What happend??
Yamaha Sheriff 1981
Gebruikersavatar
Jeti
17500km gereden
17500km gereden
Berichten: 19340
Lid geworden op: 10 aug 2008, 16:05

Bericht door Jeti »

marco schreef:What happend??
the_destroyers
5000km gereden
5000km gereden
Berichten: 6744
Lid geworden op: 14 jan 2010, 20:35
Locatie: gent

Bericht door the_destroyers »

Jeti schreef:
marco schreef:What happend??
Gebruikersavatar
TanjaFS1
1500km gereden
1500km gereden
Berichten: 1503
Lid geworden op: 25 okt 2010, 15:24
Locatie: Aachen - Aken - Aix la Chapelle

Bericht door TanjaFS1 »

Wasnt with my eyes at the traffic.... had to stop quickly, rearwheel wanted to get ahead..im on the right side blue now and can hardly walk...fizzy is okay...i was a scutcheon for her.
Gebruikersavatar
Jeti
17500km gereden
17500km gereden
Berichten: 19340
Lid geworden op: 10 aug 2008, 16:05

Bericht door Jeti »

Ohw :(
Lucky it's okay (okay enough) with you and your fiz.
Gebruikersavatar
TanjaFS1
1500km gereden
1500km gereden
Berichten: 1503
Lid geworden op: 25 okt 2010, 15:24
Locatie: Aachen - Aken - Aix la Chapelle

Bericht door TanjaFS1 »

Thank U from me and fizzy!
the_destroyers
5000km gereden
5000km gereden
Berichten: 6744
Lid geworden op: 14 jan 2010, 20:35
Locatie: gent

Bericht door the_destroyers »

I can imagine it was a bit scary. :?
One moment you are riding, the other you are against the street.
Luckily everything is kind of alright!
Gebruikersavatar
TanjaFS1
1500km gereden
1500km gereden
Berichten: 1503
Lid geworden op: 25 okt 2010, 15:24
Locatie: Aachen - Aken - Aix la Chapelle

Bericht door TanjaFS1 »

the_destroyers schreef:I can imagine it was a bit scary. :?
One moment you are riding, the other you are against the street.
Luckily everything is kind of alright!


right need one moment to get down...fixed than the front light and rode like nothin happend.....but now it hurts...cant go...

take care people the streets are slippery.
Gebruikersavatar
TanjaFS1
1500km gereden
1500km gereden
Berichten: 1503
Lid geworden op: 25 okt 2010, 15:24
Locatie: Aachen - Aken - Aix la Chapelle

Bericht door TanjaFS1 »

TanjaFS1 schreef:great fighter.



and thx.


;)
Plaats reactie